RADaptor Hardware Kit

Need Hardware?

This kit is included with every pair of RADaptors we sell, but if you plan to carry some spare parts you might consider picking up an extra kit. If you're looking to upgrade to titanium bolts, we've got you covered there as well (coming soon). Speaking of being prepared, since we've introduced a couple of hex nuts into your bike hardware, we'd suggest carrying a small 8mm open-ended wrench in case you need to adjust or replace them.

Sold In Packs (Kits)

RADaptor Hardware Specs

This is an 18-piece kit that includes the following parts:

• (4) M8 x 20mm bolts
• (4) 8mm flat washers
• (2) M5 x 16mm bolts
• (4) 5mm flat washers
• (2) 5mm split ring washers
• (2) 5mm locking hex nuts

* The titanium option replaces the stainless steel bolts for titanium bolts

Compatibility

This hardware kit is compatible with both RADaptor-1 and RADaptor-2. The M5 bolts we supply may be longer or shorter than you need, in which case, use the M5 bolts and/or spacers that shipped with your rack.

Installation Instructions

Please follow these instructions to ensure your RADaptors are installed properly and safely.

Still Have Questions?

This page should answer your question, if not feel free to get in touch.